FEDEVEL Academy – Learn the Essentials of creating uBoot, Linux and YOCTO 2020-8

FEDEVEL Academy – Learn the Essentials of creating uBoot, Linux and YOCTO 2020-8 Downloadly IRSpace

Apr 17, 2025 - 18:21 Updated: Apr 21, 2025 - 08:13

0 0

FEDEVEL Academy – Learn the Essentials of creating uBoot, Linux and YOCTO 2020-8

Learn the Essentials of creating uBoot, Linux and YOCTO, Preparing and setting up a Linux virtual computer with everything you need for compilation. Download YOCTO and create uBoot, Kernel, Device Tree and Filesystem for the reference board. What Linux to install. Installing and configuring TFTP. How to create images for the reference board. Compiling YOCTO for a custom board. Creating an SD Card needed to boot up a custom board. Boot up your board to try the generated software. How to try new uBoot, Kernel, Device Tree, and Filesystem. Setting up a new repository using GitHub to store the source code. Start adding support for your custom boards into uBoot. Create initial uBoot files with support for your custom hardware. Which files are important to create and edit. What commands you need to run to compile uBoot and compile uBoot for your custom board. How to run DDR3 calibration to get values for the memory controller and how to get DDR3 controller register values. After this step-by-step course you will know how to get uBoot, Linux and YOCTO for OpenRex board, you will know how to change the source, add a custom board support, compile it and test it. You can use similar steps to port uBoot, Kernel and YOCTO to your own boards.

What you’ll learn

Working with uBoot
Linux Kernel
Starting with YOCTO
Variant in uBoot
Variant in Kernel

Who this course is for

This course is for Beginners, Hobbyists, Students and Engineers.

Specificatoin of Learn the Essentials of creating uBoot, Linux and YOCTO

Publisher : FEDEVEL Academy
Teacher : Robert Feranec
Language : English
Level : All Levels
Number of Course : 10
Duration : 10 hours and 5 minutes

Content of Learn the Essentials of creating uBoot, Linux and YOCTO

Part 1 – Preparation
Part 2 – Compile Yocto, create SD card, add UBoot support
Part 3 – Create Uboot, DDR3 Calibration
Part 4 – Starting and Configuring UBoot
Part 5 – Custom Hardware support in Kernel, Compile Linux, Dev tree
Part 6 – YOCTO
Part 7 – Rebuilding YOCTO and copying to SD card
Part 8 – UBoot Variant Support, Flashing UBoot, Fuses and Bootstraps
Part 9 – Kernel Support and Updating SD Card
Part 10 – YOCTO Variant Support

FEDEVEL Academy – Learn the Essentials of creating uBoot, Linux and YOCTO 2020-8